Viper 330V Guide d'installation télécharger pdf (Page 12)

2. In most cars, fasten the (+) probe of your meter to (+)12V constant.

3. Probe the wire you suspect of being the door trigger wire. If the meter reads

(+)12V when any door is opened and the meter goes to 0 with the door closed,

you have found a trigger wire.

NNOOTTEE

: Make sure the wire you use “sees” all the doors! Some newer vehicles lack

standard-type pinswitches. The dome light in these vehicles is turned on when the door

handle is lifted. These usually have a wire coming out of the door into the kick panel

which will provide a (-) trigger for all doors.

main harness wire connection guide

main harness wiring diagram

___

RED/WHITE (-) 200mA Auxiliary Channel/Delayed Accessory Output

RED (+) 12V Constant Power Input

BROWN (+) Siren Output

YELLOW (+) Ignition Input

BLACK (-) Chassis Ground Input

VIOLET (+) Door Trigger Input

BLUE (-) Instant Trigger (Hood and Trunk Pin)

GREEN (-) Door Trigger Input

BLACK/WHITE (-) 200mA Domelight Supervision Output

WHITE/BLUE No Function

WHITE (+)/(-) Light Flash Output

ORANGE (-) 500mA Ground When Armed

H1/1

H1/2

H1/3

H1/4

H1/5

H1/6

H1/7

H1/8

H1/9

H1/10

H1/11

H1/12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 42 43

Pas de commentaire

Viper 330V Guide d'installation Page 12