Viper 5901 Guide d'installation télécharger pdf (Page 10)

Remote Pairing

Prepare the vehicle system to be Paired with a new remote

Open1. a door.

Turn2. the key to the ON position.

Within 5 seconds 3. press and release the Control button on the Control Center one time.

Within 5 seconds, 4. press and hold the Control button on the Control Center. The status LED will ﬂash one

time and the siren then chirps to conﬁrm the vehicle is ready for remote pairing.

Release5. the Control button and proceed below.

Note:

If no remote pairing results, the system will exit after 60 seconds.

Prepare the LC3 2-way remote control to be Paired with the system:

Remote Pair matches your LC3 remote to the system. Make sure the LC3 remote is set for the desired Car 1

(Default) or Car 2 operation for the system it will be paired with.

Press1. and hold the

A U X

button for 8 seconds (If Car 2 mode is on, ignore the Car Select beep after 3 sec-

onds) until the main menu appears.

Press2. and release the

A U X

button until

Remote Pair

text is displayed.

Press3. and release the

A U X

button until

Pair

text is displayed.

Press4. and hold the

A U X

button until tones are played on the LC3 remote.

Successful or Failed Pair: The LC3 remote control indicates a successful or failed pairing on the display. 5.

Prepare the vehicle system to be Paired with the companion or a new 1-way remote as described above.

Note: If no remote pairing results, the system will exit after 60 seconds.

Prepare the companion 1-way remote control to be Paired with the system:

Make sure the remote is set for the desired Car 1 (Default) or Car 2 operation for the system it will be paired

with.

Press and hold the 1.

A U X

button for 8 seconds.

Note: If Car 2 mode is on, ignore the Car Select beep after 3 seconds.

Wait for the Transmit LED to light solid and the remote to beep. Release the 2.

A U X

button.

Press the 3.

A U X

button for 1 second. The transmit LED will blink 3 times and beep 3 times.

Within 5 seconds, press the 4.

A U X

button.

The vehicle siren will chirp. You have now successfully learned the remote to the vehicle remote start and 5.

security system.

Press the 6.

A U X

button two times to exit learn routine on the remote. The transmit LED will turn off and exit

tone will sound.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Commentaires sur ces manuels

Pas de commentaire

Viper 5901 Guide d'installation Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Les démarreurs à distance Viper 5901